Tribe.net. Local Connections chaos http://diyscreenprint.tribe.net/thread/46b43f3c-63fb-4d23-9527-d6d860411a50#641489b4-24e9-4a81-9a4d-6d194a064ba1 2009-01-20T16:07:06Z 2009-01-20T16:07:06Z

i assume you are using water based inks, because you can't iron plastisol. it doesn't really work, you can't get an even & hot consistent heat set this way, most water based inks will self cure after about a month. or you can get union aerotex inks which self set in 24hrs. or use your home oven & a big cookie sheet, heat to 350 then put in the garment, for 3 min & remove. to be sure you will need to get a temp gun, i've seen them for as cheap as $30 some places, this way you can test the ink layer for the right temp. it needs to get to 300 degrees. ovens vary, test with junk prints before you get started. www.chaosprinting.com

chaos 2009-01-20T16:07:06Z Mary http://diyscreenprint.tribe.net/thread/46b43f3c-63fb-4d23-9527-d6d860411a50#372aa956-d1a8-4b81-9626-0e388fecc468 2008-02-28T04:22:02Z 2008-02-28T04:22:02Z

Has someone done this before? How long should I iron it? Any tips?

Mary 2008-02-28T04:22:02Z